Gravers, Scorpers, Scrapers & Deburring
Triangular 200mm Engineers Hand Scraper
DynagemTriangular 200mm Engineers Hand Scraper
Half Round 200mm Engineers Hand Scraper
DynagemHalf Round 200mm Engineers Hand Scraper
Flat 200mm Engineers Hand Scraper
DynagemFlat 200mm Engineers Hand Scraper
A = 1.78mm (No.2) HSS
DynagemA = 1.78mm (No.2) HSS
A = 0.80mm (No.8) WS; Vallorbe
DynagemGraver For Engraver; Flat Edge Size 8 WS
Taper Reamer 1/8"-1/2" 3-13mm Bridge Pin Hole Tapered Hand Held Reamer T Handle 6 Fluted Chamfer Reaming Woodworking Cutting Tool
DynagemThis is T handle taper reamer, inside deburring edge tool with capacity of 1/8" to 1/2" or 5-16mm. Features: Perfect tool kit for every DIY users ...
詳細を全部見る6pcs HSS 4341 Drill Tap Countersink Set Combination Deburr
DynagemThis 6pcs HSS 1/4" hex shank combination drill tap bit set are SAE deburr countersink bits. Great for hole drilling, tapping and deburring / counte...
詳細を全部見るØ5.00mm Mechanics Scraper
DynagemØ5.00mm;50mm long 0653-2 Mechanics Scraper; for removing excess solder from jewellery etc.
Ø50mm (Hard) Bergeon
DynagemBergeon 5700.62.50;Hard for Gripping Watch Case Backs
Ø45mm (Hard) Bergeon
DynagemBergeon 5700.62.45;Hard for Gripping Watch Case Backs
Ø40mm (Hard) Bergeon
DynagemBergeon 5700.62.40;Hard for Gripping Watch Case Backs
Ø50mm (Soft) Bergeon
DynagemBergeon 5700.52.50;Soft for Gripping Watches & Watch Heads
Ø45mm (Soft) Bergeon
DynagemBergeon 5700.52.45;Soft for Gripping Watches & Watch Heads
Ø40mm (Soft) Bergeon
DynagemBergeon 5700.52.4;Soft for Gripping Watches & Watch Heads
Ø63mm (2.5") Round Magnifier
DynagemBakelite handle;Ideal for jewellers; watch and clockmakers and hobbyists
Ø80mm (7 Row with Calico interleave) Tapered
DynagemHub Ø40mm;6mm bore;Wheel Ø80mm;Converging 7 Rows (4 bristle & 3 Standard Calico Interleaves)
A = 2.50mm (No.25) WS
DynagemA = 2.50mm (No.25) WS
A = 2.30mm (No.23) WS
DynagemA = 2.30mm (No.23) WS
A = 2.10mm (No.21) WS
DynagemA = 2.10mm (No.21) WS
A = 1.90mm (No.19) WS
DynagemA = 1.90mm (No.19) WS
A = 1.70mm (No.17) WS
DynagemA = 1.70mm (No.17) WS
A = 2.40mm (No.24) WS; Vallorbe
DynagemGraver For Engraver; Flat Edge Size 24 WS
A = 2.00mm (No.20) WS; Vallorbe
DynagemGraver For Engraver; Flat Edge Size 20 WS
A = 1.80mm (No.18) WS; Vallorbe
DynagemGraver For Engraver; Flat Edge Size 18 WS